Free calculator

Painting job quote calculator

Price interior or similar painting work from paintable area, coats, coverage, paint cost, primer and sundries, prep and painting hours, overhead, and a target margin. Starting-point figures are provided so you can edit them — they are not recommended or average market rates.

Default starting-point example: 1,200 paintable sq ft, 2 coats, 350 sq ft per gallon, $35 per gallon, $40 of primer and sundries, 3 prep hours and 8 painting hours at a $45 loaded hourly cost, 15% overhead, and a 35% target margin. Paint required is 6.86 gallons, so 7 gallons are purchased. Material cost is $285.00. Labor is $495.00. Total cost is $897.00. The quote that holds a 35% margin is $1,380.00, or $1.15 per sq ft.

Quote

Priced to the target margin you entered.

Total quote—
Price per sq ft—
Gallons to buy—
Implied markup—
  • Exact gallons needed —
  • Gallons to buy (rounded up) —
  • Paint cost —
  • Primer and sundries —
  • Material cost —
  • Labor hours —
  • Labor cost —
  • Direct costs —
  • Overhead —
  • Total job cost —
  • Quote price —
  • Price per sq ft —
  • Gross profit —
  • Implied markup —
  • Margin —

How to use this calculator

Exact gallons needed = (paintable square feet × number of coats) ÷ coverage in square feet per gallon. Gallons to buy are that amount rounded up to the next whole gallon, and paint cost uses the purchased quantity. Material cost is paint cost plus the primer and sundries allowance. Labor hours are prep hours plus painting hours, and labor cost is those hours × the loaded hourly cost. Overhead is a percent of materials plus labor. The quote is total cost ÷ (1 − margin), and price per square foot is the quote divided by paintable area.

The 350 sq ft per gallon coverage figure, the labor hours, and the dollar amounts are editable starting points so you can see the fields filled in. They are not product-label guarantees, recommended production rates, or typical market prices. Coverage varies by surface, sheen, color change, and how the product is applied. If you want to allow for waste, lower the coverage number rather than treating the gallon rounding as a waste factor — rounding up is only so the material cost reflects whole gallons you would purchase. For a job you would rather price from a production rate (square feet per hour) without a gallon count, use the square-foot quote estimator. Nothing you type is stored or uploaded.

A worked example

The default figures are 1,200 paintable square feet, 2 coats, 350 square feet per gallon, $35 per gallon, $40 of primer and sundries, 3 prep hours, 8 painting hours, a $45 loaded hourly cost, 15% overhead, and a 35% target margin. Exact gallons are (1,200 × 2) ÷ 350 = 6.86. Gallons to buy are 7. Paint cost is 7 × $35 = $245. Materials are $245 + $40 = $285. Labor hours are 3 + 8 = 11. Labor is 11 × $45 = $495. Direct cost is $780. Overhead is 15% of $780, or $117. Total cost is $897. The quote that holds a 35% margin is $897.00 ÷ 0.65 = $1,380.00, which is $1.15 per square foot. Gross profit is $483.00, a 53.85% markup.

If the same room needs a third coat and you set coats to 3, exact gallons become 10.29, gallons to buy are 11, paint cost is $385, materials $425, total cost is $1,058.00, and the 35% margin quote becomes $1,627.69, or $1.36 per square foot.

Common pricing mistakes

Counting only wall area and skipping ceilings, closets, or a second coat understates gallons and time. Using a billed hourly rate in the cost field mixes a selling price into the cost side, so the margin is applied on top of a number that already included profit. Keep the hourly figure as a loaded cost for whoever is included in the hours you entered.

Mixing up markup and margin still applies. A 35% markup on an $897 cost is $1,210.95, which is only a 25.93% margin — not the 35% margin held by $1,380.00. See the markup vs. margin calculator for the conversion. These results depend on the numbers you enter and are not a recommended price or a guarantee of profit.

Questions

Is 350 square feet per gallon the coverage I should assume?

No. It is only a starting point so the form is not empty. Read the product label and adjust for the surface, the number of coats, and how you apply the paint. If a color change or a rough surface uses more product, lower the coverage figure.

Why are gallons rounded up?

Paint is typically purchased in whole gallons, so material cost uses the next whole gallon above the exact amount needed. If the exact amount is already a whole number, no extra gallon is added. Rounding up is not a waste factor and is not a recommendation to overbuy.

Should the hourly cost be for one person or the whole crew?

Use a loaded cost for whoever is included in the prep and painting hours. If two people work the 11 hours together, either enter their combined loaded cost and 11 hours, or enter one person’s cost and the total person-hours. Keep the rate and the hours on the same basis.

Can I use this for exterior painting or cabinets?

You can enter any paintable area, coats, coverage, and hours you have. Exterior work, spray application, or cabinetry may need different prep time and coverage; replace the starting-point figures with yours. The job quote calculator is there if a lump-sum materials and hours approach is a better fit.

To reuse this math on estimates and invoices, see the Job Quoting Kit — a $29 one-time workbook and PDF guide.

See the Job Quoting Kit — $29 Get the free 2-page worksheet (PDF)

Educational tool only. Not financial, tax, legal, or business advice. No result is guaranteed.